Separate/Split Pressurized Solar Water Heater System (SJL-SP)

CE/ISO/CCC Split/Seperated Pressurized Solar Hot Water Heater/Split Solar Hot Water Heater System

Seperated Solar Water Heater
The split solar hot water is an active system, because it uses a pump with a controller to circulate the fluid in the system.
When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically, the heat-conducting liquid transfers heat to water by heat exchanger in the water tank.

Key features of Split Pressurized Solar Water Heater (SJL-SP):

1 The collector and the water tank are separated, the water tank can be installed anywhere, and the system runs under the forced pressure;

2 Pressurized design, with strong hydraulic pressure you can have hot water when you turn on your cock, the water rush out with strong hydraulic pressure make your bathe more comfortable;

3 Porcelain enamel inner tank with copper coil inside, anti-freeze fluid do heat;

4 Module design, arbitrary combination, which can meet the demand of large water consumption;

5 Intelligent control and automatic operation.

Split Pressurized Solar Water Heater (SJL-SP) Specifications:

1) Evacuated tube size: 47x1500mm; 58x1800mm

2) Evacuated tube materials: High borosilicate 3.3 glass with copper pipe

3 Water tank (interior): Stainless steel SUS304-2B 1.5mm/2.0mm

4) Water tank (exterior): Painted steel

5) Copper coils(single): Diameter12mm, thickness 0.8mm, length 15m

6) Manifold: Stainless steel/aluminum alloy

7 Insulation: Manifold: Rock wool or polyurethane

8) Solar water tank: Insulating layer is high dense polyurethane foam, thickness: 55mm/60mm

9) Frame: Stainless steel or aluminum alloy

10) Pressure: 0.6 MPa

11) Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220V, 50Hz)